What to do if my Rockville RTB-A has no sound?
If your Rockville Enclosure isn't producing any sound, here are a few things to inspect: * First, examine all input connections, including RCAs and high-level inputs. * Second, verify the ground, power, and remote connections. * Third, check the head unit, paying attention to its settings and connections.
How to fix distorted output sound on a Rockville RTB-A Enclosure?
If the output sound from your Rockville Enclosure is distorted, consider the following steps: 1. Check the gain settings. 2. Check the bass boost settings. 3. Check the head unit settings and connections.
How to troubleshoot a Rockville RTB-A Enclosure with no power?
To troubleshoot a Rockville Enclosure that has no power: 1. Check the ground, power, and remote connections. 2. Check the fuse. 3. Check the head unit for remote voltage.
Details the power connection requirements for the RTB65A unit.
Explains how to connect audio sources using High Level, RCA, or MP3 inputs.
Describes the Low Pass Crossover and Full Range/Bass selector controls.
Explains the Power and Protect LED indicators on the unit.
Illustrates the proper connections for power and remote turn-on signals.
Details how to connect audio inputs via High Level or RCA/MP3.
Details the power connection requirements for the RTB80A unit.
Explains how to connect audio sources using High Level, RCA, or MP3 inputs.
Describes the Low Pass Crossover and Full Range/Bass selector controls.
Explains the Power and Protect LED indicators on the unit.
Illustrates the proper connections for power and remote turn-on signals.
Details how to connect audio inputs via High Level or RCA/MP3.
Details the High Level input functionality for the RTB10A.
Explains the connection and use of the included Bass Remote.
Describes connecting audio sources directly via RCA outputs.
Explains the Gain, Low Pass Crossover, and Adjustable Bass controls.
Covers Power/Protect LEDs, power connections, and fuse.
Illustrates the proper connections for power, remote turn-on, and ground.
Details how to connect audio inputs via High Level or RCA.
Details the High Level input functionality for the RTB12A.
Explains the connection and use of the included Bass Remote.
Describes connecting audio sources directly via RCA outputs.
Explains the Gain, Low Pass Crossover, and Adjustable Bass controls.
Covers Power/Protect LEDs, power connections, and fuse.
Illustrates the proper connections for power, remote turn-on, and ground.
Details how to connect audio inputs via High Level or RCA.
Highlights features like High Power Woofer in Vented Tubular Enclosure.
Covers integrated amplifier and speaker/RCA line-level input.
Details adjustable crossover, bass remote, grilles, and mounting hardware.
Lists power, frequency response, sensitivity, height, and length.
Lists power, frequency response, sensitivity, height, and length.
Lists power, frequency response, sensitivity, height, and length.
Lists power, frequency response, sensitivity, diameter, and length.
Details the output and input wiring for RTB65A and RTB80A models.
Explains the High Level input harness connection for RTB10A and RTB12A.
Provides solutions for when the unit does not power on.
Offers troubleshooting steps for lack of audio output.
Lists potential causes and solutions for distorted audio output.
General| Built-in Amplifier | Yes |
|---|---|
| Remote Bass Knob | Yes |
| Thermal Protection | Yes |
| Overload Protection | Yes |
| Short Circuit Protection | Yes |
| Material | MDF |
| Woofer Size | 12" |
| Input Types | RCA |
| Impedance | 4 Ohm |
| Enclosure Type | Bass Reflex |
| Phase Switch | 0 or 180 Degrees |
| Finish | Black Carpet |
| Grille | Yes |
| Input Connectors | RCA |
To Next Page