What to do if my Rockville Monitor has no power?
If your Rockville Monitor isn't powering on, begin by checking all power and ground cables to ensure they are securely connected. Also, inspect the fuse to see if it has blown. If so, replace it with a fuse of the exact same type.
Why is my Rockville Monitor remote control not working?
If the remote control for your Rockville Monitor isn't working, make sure there are no obstructions between the remote and the sensor on the unit. Check the remote's battery and try moving closer to the unit. Also, ensure you've removed the plastic tab from the battery compartment.
How to fix a Rockville RVD14BGB Monitor with no display?
If your Rockville Monitor has no display, check all cables to make sure they are properly connected. Then, review the input mode settings in the on-screen menu. Also, inspect the ground cable, ensuring the connection point is clean and free of rust or corrosion and that the connection is tight and secure.
How to troubleshoot no sound or distorted sound on a Rockville Monitor?
If you're experiencing no sound or distorted sound with your Rockville Monitor, first check all cables to ensure they are properly connected. If that doesn't work, try using different FCA cables. Finally, check the audio output menu settings.
What to do if my Rockville Monitor displays a 'Disc Error'?
If your Rockville Monitor displays a 'Disc Error', try turning the unit off and then back on. Ensure that the disc is inserted correctly with the label side up. Check that the disc is in the proper format and verify the region settings (PAL/NTSC).
Why are USB/SD files unreadable on my Rockville RVD14BGB?
If your Rockville Monitor can't read USB or SD files, first inspect the USB thumb drive or SD card for any signs of damage. Make sure that the media files are in a supported format. It's also possible that the media files are corrupted.
Why is the playback quality poor on my Rockville RVD14BGB Monitor?
If you're experiencing poor playback quality on your Rockville Monitor, examine the disc for any scratches. If necessary, clean the disc.
Instructions on how to turn the unit on and off. Includes tips for troubleshooting power issues.
Explanation of the unit's display, settings menu, and how to switch between media inputs.
Instructions on how to browse files stored on connected SD or USB devices.
Detailed explanation of each button, port, and their respective functions on the unit's control panel.
Comprehensive list and description of all buttons on the remote control and their actions.
Instructions for playing DVDs, USB, and SD card media, including supported formats.
Guide on how to adjust unit settings using the device buttons or the remote control.
Step-by-step instructions for removing and attaching the main chassis cover of the unit.
Step-by-step procedure for physically mounting the unit in a vehicle.
Critical safety and operational advice for a proper installation process.
To Next Page
General