What to do if my Rockville Flood Light has no power?
If your Rockville Flood Light isn't powering on, start by ensuring it's properly plugged into a functioning power outlet. Also, check the power cord for any signs of damage.
Why is my Rockville Flood Light not responding to DMX?
If your Rockville Flood Light isn't responding to DMX signals, verify the starting address on the fixture is correct. Ensure you're using the correct faders on the controller and the appropriate fixture template, assigning controller faders accordingly. Try changing the signal polarity at the controller. Also, inspect your DMX cables for improper connections or damage.
How to fix intermittent DMX problems with my Rockville Spyder LED?
To resolve intermittent DMX issues with your Rockville Flood Light: * Ensure you are using DMX-compatible cables. * Keep DMX cables away from AC wires or radio equipment. * Install a terminator. * If running a long DMX cable or connecting many units, consider using an optically coupled DMX amplifier.
Setup for Master/Slave operation.
Setup for Synchronous mode operation.
DMX channel functions for 7-channel mode.
DMX channel functions for 15-channel mode.
Setup for Master/Slave operation.
Setup for Synchronous mode operation.
DMX channel functions for 7-channel mode.
DMX channel functions for 15-channel mode.
General| IP Rating | IP65 |
|---|---|
| Input Voltage | AC100-240V, 50/60Hz |
| Material | Aluminum Housing |
| Lifespan | 50, 000 Hours |
| Control | DMX512, Sound Active, Master/Slave |
To Next Page