Need help?Do you have a question about the Rocky Mountain FUSION POWERPLAY and is the answer not in the manual?
Official way to welcome you and activate your bike's warranty.
Understanding the pedal assist and acceleration characteristics.
Information on the 'Instant Start' technology and its sensitivity.
Prohibition of drive unit modification and its consequences.
Consequences of ignoring warnings: damage, injury, or death.
Importance of professional assembly and setup for brakes due to complexity.
Torque specifications for seat posts and cranksets.
Torque specifications for brakes, forks, and frames.
Detailed diagram of the TMI remote with labeled click and hold functions.
The Jumbotron display as the communication centre for system operation and diagnosis.
Apply brakes before pedal pressure to prevent unintended acceleration.
Description of the four power assistance levels: Eco, Trail, Trail+, Ludicrous.
Options to select FACTORY map or customize TUNE 1 and TUNE 2.
Parameters for adjusting Boost and Assistance Power for tunes.
Adjusting motor response from +2 (low effort) to -2 (high effort).
Adjusting power output for each assist mode from 1% to 100%.
Care and handling of sensitive battery and drive components.
Handling damaged batteries, fluid hazards, and cleaning precautions.
Extinguishing battery fires and unplugging power sources.
Using dedicated chargers and avoiding direct sunlight during charging.
Step-by-step guide for recharging the Powerplay™ battery.
Important notes regarding charging, system faults, supervision, and temperature limits.
Guidelines for storing the Powerplay™ bike and battery to maintain capacity.
Battery performance in cold/hot temperatures and power reduction at low capacity.
Procedure for removing the removable battery using a 4mm hex bolt.
Steps to remove the motor from the frame, including unscrewing mounting screws.
Disconnecting the remote and removing the motor from the non-drive side.
Torque specifications for motor mount and cover screws during reinstallation.
Procedure to restore Dyname system to original factory settings via main menu.
Using Jumbotron for error messages and guided repair instructions.
Working with dealers for diagnostics, error codes, and field repairs.
Warning against tampering, its risks, warranty voidance, and authorized parts.
Routine checks of drivetrain, bolts, motor mounts, and other components.
Checklist for chain, charge port, torque sensor, motor, and cables at intervals.
Process for registering your bike for warranty and support.
Details on warranty terms for frame members, hardware, electronics, and drive wear items.
24-month warranty for the battery, noting range variation and storage advice.
Conditions under which the warranty is not valid (e.g., commercial use, unauthorized dealers).
Exclusions like normal wear, accident damage, improper maintenance, and extreme riding.
Limitation of Rocky Mountain's liability and warranty scope.
General| Wheel Size | 29" |
|---|---|
| Suspension Type | Full Suspension |
| Seatpost | Rocky Mountain 30.9mm |
| Motor | Shimano STEPS EP8 |
| Frame | FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-9™ Adjustable Geometry + Suspension Rate. Size Specific Chainstay. FORM™ Alloy Rear Triangle |
| Headset | FSA Orbit NO.57E | Sealed 36°x45° Bearings | 30.2x41x7.1mm Top | 39x55.8x8mm Bottom |
| Stem | Rocky Mountain 35 |
| Handlebar | Rocky Mountain 35 |
| Grips | Rocky Mountain Lock-on |
| Shifters | Shimano SLX |
| Rear Derailleur | Shimano SLX |
| Rims | WTB ST i30 TCS |
| Drive System | Shimano STEPS EP8 |
| Battery | 720 Wh Integrated Removable Battery |
| Remote | Shimano SC-EM800 |
| Display | Rocky Mountain Jumbotron Display |
| Sizes | S-XL |
To Next Page