Rocky Mountain IWOC - User Manual

IWOC INSTALLATION
Tech Bulletin
Bulletin technique
Technisches Merkblatt
Bollettino Tecnico

Summary

IWOC Installation Guide

iWoc Installation Overview

Provides an introduction to installing the iWoc remote for Altitude Powerplay systems.

Mounting and Clamping the iWoc Remote

Mount the iWoc remote between grip/brake and tighten clamp to 1Nm.

Wire Routing and Initial Securing

Route wire under brake lever and use zip ties under stem.

Finalizing Port and Cable Trim

Position USB port and trim excess zip ties.

Access Frame Port and Connect iWoc

Remove cover, locate connector, and attach iWoc to remote.

Internal Assembly and Port Cover Reinstallation

Insert connector assembly into frame and reinstall port cover.

Final Securing of Port Cover and Wire

Tighten port cover and secure iWoc wire to seatpost housing.

Understanding the iWoc Remote Functions

Final Trim of Zip Ties

Trim excess zip ties for a clean installation.

iWoc Remote Button Operations

Explains button functions for assist, power, notifications, and walk mode.

iWoc Remote LED Indicator Guide

Details LED indications for battery level and assistance mode.

iWoc LED Indicators and Modes

Battery Level LED Indicators

Describes LED patterns for different battery charge levels.

Assistance Mode LED Indicators

Explains LED patterns for various assistance modes like Eco and Trail.

Notifications and Error Alerts

Details LED indications for Bluetooth connectivity and error states.

Walk Mode LED Indicator

Describes the LED indication for engaging Walk Mode.

Rocky Mountain IWOC Specifications