roco WLANmaus Z21 - Page 51

51
English
Three useful WLANmaus aids for the turnout mode
Toggle mode
You can switch between the current turnout and the turnout last called up by pressing the OK-key.
This provides you with quick access to two sets of turnouts which, for instance, are next to each other
on a stretch of track.
Adress-scrolling
Press the -key and one of the arrow keys at the same time and the WLANmaus will scroll through
all the turnout addresses.
Turnout short-cut keys
For quick access you can store the 10 most frequently used turnouts as a short-cut function on the
function keys. To do so, proceed as in the following example:
▪
Turnout 5 and 14 are to be made available for activation using function keys "1" and "2". First
call up turnout 5 as usual in turnout mode. Press the MENU-key and function key "1" together
and conrm with the OK-key.
▪
Then call up turnout 14. Press the MENU-key and function key "2" together again and conrm
with the OK-key.
▪
You can now call up these two sets of turnouts at any time by pressing the -key and the respec-
tive function key. You can switch the turnouts by using the depressed “switch” key together with
the respective function key.
In the factory setting, the turnouts 1 –10 are set to the function keys with the same numbers (turn-
out 10 = function key "0"). You can overwrite this saved order.
Operation - Driving and Switching
8010813920.indd 51 13.07.2017 10:27:47