Do you have a question about the ROGER MAYER Voodoo-Vibe and is the answer not in the manual?
Details the Voodoo-Vibe's evolution from Univibe, its connection to Jimi Hendrix, and its expanded features.
Explains the Voodoo-Vibe's all-analogue operation, transparent sound, Class A circuitry, and noise performance.
Introduces the controls on the front panel, detailing their function and operation.
Sets the operating mode (Chorus, Vibrato, Tremolo) via a front panel switch.
Offers three speed ranges with sine or triangular wave types for modulation effects.
Provides fine adjustment for the selected speed range, allowing precise speed settings.
Adjusts waveform linearity for sweep effects, altering rise/fall times and impacting sound.
Tunes sweep effects, changes center frequency, and adjusts depth/offset for various modes.
Controls the level of depth for the effect, used with other controls to set the desired sound.
Sets the required output level of the Voodoo-Vibe unit.
Powers the unit via a 9V battery when a lead is inserted. Keep plug out when not in use.
Provides a hard wire or true bypass output, disconnecting buffered outputs when selected.
Offers dual low impedance Class A buffered outputs for splitting signals and driving long cables.
Connects to an external foot volume pedal for speed control. Wiring diagrams available online.
Connects an external AC adapter using a standard negative centre pin protocol.
Access to the internal battery is made by loosening bottom screws; alkaline type recommended.
The LED indicator shows the status of the unit.
Recommends AC adapter for extended use and unplugging the input lead when not in use.
Requires 9V alkaline battery or AC adapter (9V, 50mA). A regulated type adapter is recommended.
The input impedance of the Voodoo-Vibe unit is 1M ohms.
The output load impedance is 10K ohms or more.
The signal to noise ratio of the unit is 102dB.
The physical dimensions of the unit are 220mm (W) x 75mm (H) x 150mm (D).
The weight of the Voodoo-Vibe unit is 1470g.
| Technology | Analog |
|---|---|
| Power Supply | 9V DC |
| Bypass | True Bypass |
| Input Impedance | 1 MOhm |
| Output Impedance | 10 kOhm |
| Type | Chorus |
| Controls | Speed, Intensity |
Loading...