Roger Technology BH30 Series - Maintenance; Maintenance Log

10
DECLARATION OF INCORPORATION
(Directive 2006/42/CE - Annex II B)
The manufacturer: Roger Technology - Via Botticelli 8, 31021 Bonisiolo di Mogliano V.to (TV)
Declares that the partly-completed machinery designed to be incorporated according to the corresponding instructions manual:
Description of the device: 24 V DC automated system for sliding gates BH30 Series powered by the built-in control unit.
Built-in control unit model: B70/1DC
Product code
Serial Number
See the P.CODE eld on the label applied to the product
See eld IN on the label attached to the product.
is compliant with the provisions of the following Community directives:
• 2006/42/EC directive (Machinery Directive) and the related technical documentation has been compiled according to annex VII B of the same directive;
• 2014/30/EU directive (Electromagnetic Compatibility);
• 2014/35/EU directive (Low Voltage);
• The Radio Equipment Directive 2014/53/EU (RED).
• 2011/65/UE directive (RoHS)
and that the following regulations and/or technical specications have been applied:
EN 301 489-1 V2.2.0; EN 62233: 2008;
EN 301 489-3 V2.2.1; EN 60335-1: 2012 + A11:2014+A1 (IEC):2013
EN 55014-1: 2006 + A1:2009 + A2:2011; EN 60335-2-103: 2015;
EN 55014-2: 2015; EN ISO 13849-1:2015;
EN 61000-3-2: 2014; EN ISO 13849-2:2012;
EN 61000-3-3: 2013;
EN 61000-6-2: 2005;
EN 61000-6-3: 2007; + A1:2011;
Declares to undertake to provide information related to the partly-completed machinery, following a duly justied request from the national authorities. The
commitment includes the transmission methods and does not affect the intellectual property rights of the manufacturer of the partly-completed machinery.
Declares that the partly-completed machinery must not be commissioned until the nal machinery in which it will be incorporated is declared compliant with
the provisions of the 2006/42/EC directive.
Place and date of declaration Person authorised to compile the technical documentation Company name and full address of the manufacturer:
ROGER TECHNOLOGY S.R.L. Via S.Botticelli, 8
31021 Bonisiolo di Mogliano Veneto Treviso ITALY
Bonisiolo di Mogliano Veneto
10/11/2016
Research and Development Ocer
(Ing. Dino Cinti)
Legal Representative of the company
(Dino Florian)
Rev001