To Next PageTo Next Page
Need help?Do you have a question about the Rogue Audio RP-5 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Total Harmonic Distortion | <0.1% |
| Weight | 22 lbs |
| Phono Gain | 44dB |
| Phono Input Impedance | 47k Ohms |
| Inputs | 1 Phono |
| Outputs | 2 Main |
| Signal-to-Noise Ratio | >90dB |
| Gain | 12dB (line stage) |
| Tube Complement | 4 x 12AU7 |
Details critical safety warnings about lethal voltages and waiting periods before handling the preamplifier.
Guides on powering on the RP-5, including primary switch, front panel button, soft-start, and initial power-up sequence.
Details the user-configurable phono section, gain/loading adjustments, and critical safety warnings before internal access.
Explains how to use DIP switches for setting resistive loading options for various phono cartridges.
Provides guidance on diagnosing and resolving speaker hum issues, likely related to ground loops or power connections.
Steps to troubleshoot issues where the unit fails to power on, checking cord connections and rebooting.
Guides on resolving issues where the unit powers on but does not produce sound, checking connections and buttons.
Diagnoses and solutions for problems where only one audio channel is active, checking balance and tube seating.
