COMP Mode - Continued
Once the console is in COMP READY mode, the goal field is shown on the screen and the LED indicator will flash twice every 1.5
seconds.
To exit COMP READY mode, press STOP and hold it for a full 5 seconds.
To start the competition, simply press START. This is COMP RUNNING mode and the LED will flash continuously.
Paused Mode
The console will enter PAUSED mode when the user presses the START button during workout. The console will enter PAUSED mode
automatically when the user stops pedaling for 8 seconds during non-interval workout. In PAUSED mode, the LCD will be flashing.
Pressing START button in PAUSED mode will bring the console back to Workout mode, resuming the exercise.
Sleep Mode
When there is no cadence signal or button events for over 5 minutes, the console will go into the Sleep Mode. The LCD will be off.
Upon pressing any button or pedaling, the console will wake up and undergo the Power-On sequence and enter the Idle mode.
Changing the Unit System
The default unit system is the imperial unit system. Press and hold both the UP and DOWN buttons for 3 seconds in IDLE mode to
toggle the unit system between the metric and imperial unit system. The console will be flashing the new unit system.
GENERAL MAINTENANCE
BEFORE FIRST USE
-CHECK THAT ALL BOLTS ARE TIGHT
-CHECK THAT PEDALS HAVE BEEN FULLY THREADED ONTO CRANKS
-CHECK THAT ARMS ARE TIGHTLY SECURED AND THAT THERE IS NO “PLAY”
THESE CHECKS SHOULD BE REPEATED DURING THE FIRST WEEK OF USING THE BIKE AND WEEKLY THEREAFTER
4
ROGUE FITNESS
511 E 5th Ave
Columbus, OH 43201
(614) 358-6190
TEAM@ROGUEFITNESS.COM
FOR QUESTIONS OR CONCERNS PLEASE CONTACT TEAM@ROGUEFITNESS.COM
To Previous Page
Loading...