Preparing for Use
R&S
®
FPL1000
31Getting Started 1323.1602.02 ─ 07
●
"Instrument": a standard user account with limited access
●
"Administrator": an administrator account with unrestricted access to the
computer/domain
Some administrative tasks require administrator rights (e.g. the configuration of a
LAN network). Refer to the description of the basic instrument Setup ([Setup]
menu) to find out which functions are affected.
Automatic login
When shipped, the instrument automatically logs on the default "Instrument" user
to Windows using the default password. This function is active until an administra-
tor explicitly deactivates it or changes the password.
For information on how to deactivate or reactivate the automatic login, refer to the
R&S FPL1000 user manual.
Passwords
For all default user accounts, the initial password is 894129. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login. An administrator can change the password in Windows for
any user at any time via "Start > Settings > Account > SignIn Options > Password
> Change".
Switching users when using the automatic login function
Which user account is used is defined during login. If automatic login is active, the
login window is not displayed. However, you can also switch the user account to
be used when the automatic login function is active.
1. Select the "Windows" icon in the toolbar to access the operating system of the
R&S FPL1000 (see also "To access the "Start" menu" on page 30).
2. Press [CTRL] + [ALT] + [DEL], then select "Sign out".
The "Login" dialog box is displayed, in which you can enter the different user
account name and password.
Logging On
To Next Page
Loading...
