Need help?Do you have a question about the Rohde & Schwarz FSUP8 and is the answer not in the manual?
General| Frequency Range | 20 Hz to 8 GHz |
|---|---|
| Dynamic Range | > 100 dB |
| Resolution | 1 Hz |
| Input Power Range | -30 dBm to +20 dBm |
| Analysis Bandwidth | Up to 40 MHz |
| Resolution Bandwidth | 1 Hz to 10 MHz |
| Amplitude Accuracy | ±0.5 dB |
| Input Impedance | 50 Ω |
| Maximum Input Level | +30 dBm |
| Operating Temperature Range | +5 °C to +40 °C |
| Display | Color LCD |
| Displayed Average Noise Level (DANL) | -155 dBm/Hz |
| Input VSWR | <1.5:1 |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz |
Process of eradicating data on media so it cannot be retrieved using standard interfaces.
Process of removing or eradicating stored data so it cannot be recovered using any known technology.
Procedures to undertake before removing an instrument from a secure environment.
Memory that loses its contents when power is removed; not considered a security concern.
Temporary storage for OS and firmware; loses data when power is removed.
Memory that retains data without power; only removable compact flash holds user data.
Stores hardware info, serial number, options; does not hold user data.
Contains BIOS; does not hold user data or allow user access.
Holds user data non-volatily; removable compact flash can be removed.
EEPROM holds calibration data; replacing flash memory does not affect calibration validity.
Procedure to disable write capability on USB ports via utility software.
To Next Page