Need help?Do you have a question about the Rohde & Schwarz FSV40 and is the answer not in the manual?
General| Frequency Range | 10 Hz to 40 GHz |
|---|---|
| Input Power Range | -30 dBm to +30 dBm |
| Video Bandwidth (VBW) | 1 Hz to 10 MHz |
| Sweep Time | 1 ms to 1000 s |
| Input Impedance | 50 Ω |
| Maximum Input Level | +30 dBm |
| Dynamic Range | > 100 dB |
| Third Order Intercept (TOI) | +20 dBm |
| Input VSWR | <1.5:1 |
| Resolution Bandwidth | 1 Hz to 10 MHz |
| Analysis Bandwidth | 40 MHz standard, Up to 160 MHz with option FSV-B71/B160 |
| DANL (Displayed Average Noise Level) | -155 dBm (1 Hz RBW, preamp on) |
| Amplitude Accuracy | ±0.3 dB |
Defines the meaning of signal words like DANGER, WARNING, CAUTION, and NOTICE used in documentation.
Provides essential safety instructions regarding electrical hazards and proper connection.
Understand and follow safety instructions to prevent injury or equipment damage.
Details security issues for operating the instrument in secure areas.
Contains general safety instructions, operating conditions, and important information.
Describes the front panel elements including function keys and connectors.
Provides a view and description of the instrument's rear panel connectors.
Basic steps for setting up the instrument for the first time, including safety notices.
Procedures for installing new firmware versions via USB, GPIB, LAN, or remote PC.
Describes information displayed in the measurement diagram area.
Details interaction methods like touchscreen, keypad, rotary knob, and softkeys.
How to perform basic tasks like entering numeric and alphanumeric parameters.
Instructions on changing focus, display modes, soft panels, toolbar, and zoom.
Configuring and establishing remote control using Windows Remote Desktop.
To Next Page