Instrument tour
R&S
®
RTA4000
23Getting Started 1335.7881.02 ─ 05
[Gen]: Function Generator (7)
BNC output of the function generator (with option R&S RTA-B6).
[Pattern Generator] (8)
Connectors for the pattern generator P0, P1, P2, P3.
[Probe Comp.] (9)
Probe compensation terminal to support adjustment of passive probes to the
oscilloscope channel.
Square wave signal for probe compensation.
Ground connector for probes.
[USB] type A (10)
USB 2.0 type A interface to connect a mouse or a keyboard, or a USB flash drive
for storing and reloading instrument settings and measurement data, and to
update the firmware.
4.2 Side view
Figure 4-2: Side view of R&S
RTA4000
1 = Connectors for logic probe (Mixed Signal Option R&S RTA-B1)
Side view
To Next Page
Loading...
