Rohde & Schwarz RTP Series - Working with Waveforms

Operating the Instrument
R&S
®
RTP
46Getting Started 1337.9946.02 ─ 05
5.4 Working with Waveforms
The R&S RTP can create and display several types of waveforms:
●
Channel waveforms:
Up to three waveforms per input channel can be shown. For a four-channel
instrument, 12 channel waveforms are available.
●
Reference waveforms:
Four waveforms can be used as reference for comparison and analysis.
●
Math waveforms:
Four mathematic waveforms can be created with mathematic operations per-
formed on channel, reference, and other math waveforms.
●
Zoom waveforms:
Show the details of waveforms.
●
XY-waveforms:
Four XY-waveforms can be created. Each XY-waveform is built from the volt-
age values of two source waveforms.
●
Digital waveforms:
The Mixed Signal Option R&S RTP-B1 provides 16 digital channels grouped
in two logic probes (pods) with 8 channels each.
Working with Waveforms