Operating the Instrument
R&S
®
RTP
54Getting Started 1337.9946.02 ─ 05
One-click actions Interactive actions
Spectrogram (option R&S RTP-K37)
Zone trigger (option R&S RTP-K19)
You can configure the content of the toolbar and hide the date/time display,
see Chapter 5.6.2, "Configuring the Toolbar", on page 52.
The following list describes at first the default toolbar functions and then the addi-
tional functions.
Undo
Undoes the last setting actions step by step. Some actions cannot be
revoked: locking the touchscreen with [Touch Lock], and saving data. The undo
stack is deleted during the following actions: Reloading settings from file, and ref-
erence waveform actions (save, load and preset with active reference waveform).
Redo
Recovers the undo steps in reverse order.
Show Help
Enables the tooltip display. A short description appears when you tap a
parameter in a dialog or result box. To open the corresponding help topic, tap the
"Show Help" button in the lower right corner of the tooltip. See also: Chapter 5.11,
"Getting Information and Help", on page 66.
Graphical Recall (load saveset)
Opens a window to select and load instrument settings that were previ-
ously stored in a saveset. A graphical preview helps you to find the required set-
tings.
Zoom
The zoom icon on the toolbar shows the last selected zoom type. A short tap on
the icon activates the selected zoom.
To use another zoom type, select it in the sidebar.
Standard zoom ← Zoom
Displays a magnified section of the diagram in an additional zoom dia-
gram. It is a display zoom, instrument settings are not changed.
Toolbar
To Next Page
Loading...
