Rohde & Schwarz XD 4410A - Page 141

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Special Conditions
6076.0822.12.01 – 3.27 –
4 For entry of a new radio session PIN fol-
low the same procedure as described for
the radio maintenance PIN (see softkey
2).
14 Press softkey PIN
CU MAINT.
Abort entry.
Entry of new CU maintenance PIN
1. Enter the CU SYSTEM PIN number by
using the numerical keypad, then press
ENTER.
2. Enter new MAINT PIN number by using
the numerical keypad, then press
ENTER.
3. Confirm the new MAINT PIN number by
repeating the entry by using the numeri-
cal keypad, then press
ENTER.
No. Control Action Notes