Rohde & Schwarz XD 4410A - Page 178

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Special Conditions
– 3.64 – 6076.0822.12.01
Starting point: Menu 040 (MAIN)
+ Press softkey (5) and the following display appears:
+ Enter setup PIN number (5 digits) by using the numerical keypad, then press ENTER.
q The following display appears:
No.
Control Action
Notes
9 Press softkey
SETUP.
Abort entry.
Entry of a new setup PIN.
1. Enter the new PIN by using the numerical
keypad, then press ENTER.
2. Confirm the new PIN by repeating the entry
using the numerical keypad, then press EN-
TER.
See also chapter 3.6.
softkey SETUP...
for future use

0HQX
0HQX
0HQX
0HQX