065 75$16&(,9(5 ; $ ; $
Operator’s Manual • V.24 Remote Control (S400U Protocol)
– A2.2 – 6076.0822.12.02
$ $GGUHVVLQJ
$ $GGUHVVLQJ5DQJH
Addresses 01 to 99 are the generally used device addresses.
The following is valid if Tx operation is separated from Rx operation (Split Site):
Rx addressing range: 01 to 49
Tx addressing range: 50 to 99
Tx address = (associated Rx) + 50
$ &KDUDFWHULVWLFVRI'DWD7UDQVPLVVLRQ
Transmission is carried out asynchronously in ISO-7-bit code and with odd parity (with
300 Baud even parity). Characters with wrong parity and faulty ones will be ignored.
Baud rates between 300 and 115 200 baud are accepted.
To Next Page
Loading...
