Rohde & Schwarz ZVA8 - Page 2

This quick start guide describes the following vector network analyzer types:
●
R&S
®
ZVA8, order no. 1145.1110.08/10 (2 or 4 test ports)
●
R&S
®
ZVA24, order no. 1145.1110.24/26 (2 or 4 test ports)
●
R&S
®
ZVA40, order no. 1145.1110.40/42/43/45 (2.92 mm, 2 or 4 test ports and 2.4 mm, 2 or 4 test ports)
●
R&S
®
ZVA50, order no. 1145.1110.50/52 (2 or 4 test ports)
●
R&S
®
ZVA67, order no. 1305.7002.02/04 (2 or 4 test ports)
●
R&S
®
ZVA80, order no. 1312.6750.02/03/04. An additional quick start guide 1312.6808.62 is available
for these instruments.
●
R&S
®
ZVA110, order no. 1312.7004.03/04. An additional quick start guide 1314.4502.62 is available for
these instruments.
© 2010 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: info@rohde-schwarz.com
Internet: http://www.rohde-schwarz.com
Printed in Germany – Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
The following abbreviations are used throughout this guide: R&S
®
ZVAxx is abbreviated as R&S ZVAxx, R&S
®
ZVA-xxx as R&S ZVA-
xxx