Getting Started
R&S
®
ZVA
44Quick Start Guide 1145.1090.62 ─ 10
To move the trace relative to the vertical axis proceed as follows:
1. Create a normal marker, e.g. the marker "M 1", and place it to a particular trace point.
E.g. you can use the marker "Search" functions to locate a maximum or minimum on
the trace.
2.
Click "Trace – Marker Funct. – Max = Marker" to move the trace towards the upper
diagram edge, leaving the values of the vertical divisions ("Scale Div.") and the overall
vertical scale unchanged. Analogously, click "Min = Marker" to move the trace
towards the lower diagram edge, or click "Ref Value = Marker" to move the trace
towards the "Reference Value".
2.3.3.6 Enlarging the Diagram Area
The analyzer provides different tools for customizing the contents and size of the diagram
areas:
●
"Maximize" allows you to enlarge the active diagram area to occupy the whole win-
dow. A double-click on any point in the diagram area is equivalent to the "Maxi-
mize" function.
●
The "Title", the "Softkey Labels", the "Status Bar" and the "Hardkey Bar" are optional
display elements which you can hide in order to gain space for the diagram.
●
Use the context menu of the diagram area, the keys in the DISPLAY keypad bar or
the "Display" menu to access the scaling functions above.
Basic Tasks
To Next Page
Loading...
