System Overview
R&S
®
ZVA
58Quick Start Guide 1145.1090.62 ─ 10
to display and hide data and memory traces. Use the "Trace Funct(ions)" to define
mathematical traces.
Right-click any of the sections in the trace list (except the type section) to open a context
menu and access the most common tasks related to the section.
A right mouse click on the trace name, the measured quantity, and the format and scale
section of the trace list opens the following context menus, respectively:
The settings correspond to the most common commands in the "Trace – Trace Select",
"Trace – Trace Funct", "Trace – Meas", "Trace – Format" and "Trace – Scale" menus.
A red label "Cal Off !" appears behind the trace list if the system error correction no longer
applies to one or more traces.
3.2.2.3 Markers
Markers are tools for selecting points on the trace and for numerical readout of measured
data. The analyzer provides three different basic marker types.
Screen Elements
To Next Page
Loading...
