R&S ZVH Spectrum Analyzer Mode (R&S ZVH-K1)
Configuring Spectrum Measurements
Operating Manual 1309.6946.12 - 09 148
Demodulating signals
If you turn on the demodulator, the R&S ZVH automatically turns off the noise marker
or the frequency counter.
Defining the demodulation time period
► Press the MARKER key.
► Press the "Marker Function" softkey.
► Select the "Time…" menu item.
The R&S ZVH opens an input field to define the demodulation time.
► Enter the demodulation time you need.
The range is from 100 ms to 500 s. In time domain the R&S ZVH demodulates
continuously, i.e. the demodulation time is not relevant.
Controlling the volume
► Press the MARKER key.
► Press the "Marker Function" softkey.
► Select the "Volume…" menu item.
The R&S ZVH opens an input field to define the demodulation volume.
► Enter the volume you are comfortable with.
The demodulation volume is a percentage (0 % to 100 %) with 100 % being full
volume.
For more information on general volume control see the Quick Start Guide.
To Next Page
Loading...
