R&S ZVH Spectrum Analyzer Mode (R&S ZVH-K1)
Configuring Spectrum Measurements
Operating Manual 1309.6946.12 - 09 152
Audio signal
You can turn the acoustic signal that sounds in case of a limit violation on and off.
► Press the "Options" softkey.
► Select the "Audio Beep" menu item.
An [X] in front of the "Audio Beep" menu item indicates that the beeper is active. If
the audio beep is active, the R&S ZVH beeps each time a limit is violated.
Limit violation
Note that a limit check fails only if the signal exceeds the limit line.
If the signal level is the same as the limit value, the limit check passes.
To Next Page
Loading...
