R&S ZVH Power Meter (R&S ZVH-K9)
Performing Pulse Power Measurements (R&S ZVH-K29)
Operating Manual 1309.6946.12 - 09 175
5.4.2.5 Selecting the Result Unit
In the pulse measurement application, the R&S ZVH can display measured power in
relative units (dBm) or in absolute units (W).
► Press the AMPT key.
► Press the "Unit" softkey.
► Select the unit you prefer.
The R&S ZVH adjusts the y-axis accordingly.
5.4.2.6 Scaling the Y-Axis
The functionality to scale the y-axis is similar to that of the Spectrum application.
For more information see "Setting a Display Range" on page 127.
5.4.2.7 Using Markers
The Power vs Time diagram supports markers. The functionality is similar to that of the
Spectrum application.
For more information see "Using Markers" on page 145 (note that marker functions are
not available in the Power Meter mode).
To Next Page
Loading...
