Rohl R1062BO1 - User Manual

To Next Page

R1062BO

1/2" NPT

4 1/2"

2 9/16"

3 1/8"

4 3/8"

1 3/4"

MIN 3 3/8"

MAX 5 1/2"

3 1/2"

5/8"

COLORS/FINISHES WARRANTY

• Limited Lifetime• Rough only

4-PORT, 3-WAY DEDICATED DIVERTER ROUGH-IN VALVE

houseofrohl.com

Consult your local House of Rohl showroom for additional information and specications. For complete warranty details and a list of showrooms, go to houseofrohl.com

• Rough valve only, no nish

• Solid brass construction

• Ceramic disc cartridge

• Must have both rough and trim to complete the

installation.

• Flush the plumbing system before installing this product.

• Must follow dimensions supplied for installation and

make sure allowance is made for nished wall material

such as tile, etc.

• Must use with volume control when used with

thermostatic valve: Order: R1040R

• 1 X 1/2”M NPT inlet

• 3 X 1/2”M NPT outlets

• Flow is dedicated

• May not be split into two outlets at once

• CalGreen compliant

• 5 GPM at 60 psi

• Outlets may be capped if not used

• Min. depth is 3 3/8” from middle of the valve outlet

• Max. depth is 5 1/2 “ from middle of valve outlet (check

dimensions)

• Extension solution included in the rough package. Cut

barrel and extension to size as needed.

• Stem is part of the cartridge. To replace the cartridge

order: 15251KIT – Includes all thread

• Made in Germany

FEATURES

Main Page

Need help?

Do you have a question about the Rohl R1062BO1 and is the answer not in the manual?

The ROHL R1062BO is a 4-port, 3-way dedicated diverter rough-in valve, designed to manage water flow in a plumbing system. This rough valve is sold without a finish, allowing for customization with a separate trim kit to complete the installation. It is constructed from solid brass, ensuring durability and longevity.

Function Description:

The primary function of the R1062BO is to divert water flow to up to three distinct outlets. It features a dedicated flow mechanism, meaning that water cannot be split into two outlets simultaneously. This ensures that each outlet receives the full water pressure when activated. The valve is designed to be used with a volume control, especially when integrated into a thermostatic valve system. For such applications, the R1040R volume control is recommended. The diverter cartridge within the R1062BO is a key component, responsible for directing the water flow to the selected outlet. There are two types of diverter cartridges mentioned: a 3-way dedicated diverter cartridge (R1062) and a 3-way shared diverter cartridge (R1062), though the R1062BO specifically refers to a dedicated diverter.

Important Technical Specifications:

Inlet/Outlet Configuration: The valve has one 1/2" M NPT (Male National Pipe Taper) inlet and three 1/2" M NPT outlets.
Flow Rate: It is CalGreen compliant and offers a flow rate of 5 GPM (Gallons Per Minute) at 60 psi (pounds per square inch).
Installation Depth: The minimum depth from the middle of the valve outlet to the finished wall is 3 3/8 inches. The maximum depth is 5 1/2 inches from the middle of the valve outlet. These dimensions are critical for proper installation and ensuring the trim fits correctly.
Temperature Range: The recommended operating temperature range for the system is 50-120°F (10-49°C).
Pressure Range: The acceptable pressure range is 15-75 PSI, with a recommended pressure of 60 PSI.
Dimensions:
- Overall width (from inlet to furthest outlet): 4 1/2" (or 4 3/8" for the main body).
- Depth from mounting surface to front of valve: 1 3/4".
- Overall height (including NPT connections): 3 1/2".
- Distance between mounting points: 2 9/16" x 3 1/8".
- NPT connection length: 5/8".
Cartridge: The stem is an integral part of the cartridge. The replacement cartridge order number is 15251KIT, which includes all necessary threads.
Extension Solution: An extension solution is included in the rough package, allowing the barrel and extension to be cut to size as needed for varying wall depths.

Usage Features:

Dedicated Flow: The "dedicated" nature of the diverter means that only one outlet can be active at a time, preventing simultaneous water flow to multiple fixtures. This is important for maintaining consistent water pressure and flow to the selected outlet.
Outlets: The three outlets provide flexibility for connecting various fixtures such as showerheads, hand showers, or body sprays. Unused outlets can be capped if not required.
Compatibility: Designed to be used with a separate trim kit, allowing for aesthetic customization to match bathroom decor. It is also compatible with specific volume controls (R1040R) when used with a thermostatic valve.
CalGreen Compliant: Meets CalGreen standards, indicating compliance with water efficiency regulations.
Made in Germany: The product is manufactured in Germany, suggesting adherence to high-quality engineering and manufacturing standards.

Maintenance Features:

Flushing the Plumbing System: Before installation, it is crucial to flush the plumbing system to remove any debris that could potentially damage the product or affect its performance.
Cartridge Replacement: The stem is part of the cartridge. If the stem is cut too short during installation, the entire cartridge (15251KIT) must be replaced. The all-thread sleeve can be replaced if cut too short, but the all-thread does not stack.
Solid Brass Construction: The solid brass construction contributes to the valve's longevity and resistance to corrosion, reducing the need for frequent maintenance.
Limited Lifetime Warranty: The product comes with a limited lifetime warranty against manufacturing defects, providing assurance and support for potential issues.
Finish Care: While the rough valve itself has no finish, the manual emphasizes the importance of proper care and maintenance for the chosen trim finish to preserve its appearance. Specific instructions for finish care are available on the manufacturer's website.
Customer Support: ROHL provides customer care services via phone, email, and website for additional information, specifications, warranty details, and troubleshooting.

Rohl R1062BO1 Specifications

General

Brand	Rohl
Model	R1062BO1
Category	Control Unit
Language	English