Why is the suction power so low on my Rohnson Vacuum Cleaner?
The suction power might be low on your Rohnson Vacuum Cleaner due to several reasons: * The dust bin may be full – empty it. * The filters could be dirty or blocked – clean or replace them. * The air inlet of the tube or power brush may be blocked – clear any dirt or obstructions.
What to do if the Rohnson Vacuum Cleaner's operating time is not enough after charging?
If your Rohnson Vacuum Cleaner isn't operating long enough after a charge, it could be due to the following: * The battery may not have been fully charged. Ensure you charge it fully as directed. * The battery might be damaged or too old, in which case you should replace it.
How to fix a Rohnson Vacuum Cleaner when the motor does not operate?
If the motor of your Rohnson Vacuum Cleaner isn't working, check these: * The vacuum cleaner might not be charged, so charge it. * The metal tube, floor power brush, battery pack, and hand-held vacuum cleaner might not be correctly assembled. Ensure all components are properly connected.
Explains the two ways to charge the vacuum cleaner.
Instructions for attaching the handheld vacuum and removing the dust cup.
How to connect the floor brush, metal tube, and handheld vacuum.
How to operate the handheld vacuum cleaner, including power and speed.
Using the vacuum with different floor rollers for various surfaces.
Instructions for using the included accessories like crevice and combination tools.
Guide on how to mount the storage base on the wall.
Procedure for removing and emptying the dust from the bin.
Instructions on how to clean the vacuum's filters.
Steps to clean the main brush and rollers for efficiency.
How to install the battery pack and the charging process.
Steps to attach the dust cup to the handheld vacuum cleaner.
General| Cord Length | 5 m |
|---|---|
| Noise Level | 78dB |
| Filtration | HEPA |
| Filters | Washable |
| Type | Bagless Vacuum Cleaner |
To Next Page
