Rohr MIG-150R - User Manual

INVERTER MIG / MAG
ONDULEUR MIG / MAG
MIG-135A • MIG-150R
This manual provides important safety information and instructions on how to set up your welder. Every welding
situation has the potential for personal injury. In order to minimize that risk, it’s important to read this manual
carefully.
Keep this manual in a safe place, review it frequently and ensure that
all users have read it to ensure safe operation.
Ce manuel fournit des informations de sécurité importantes et des instructions concernant la conguration de votre
chargeur de batterie. An de minimiser les risques, il est important de lire attentivement ce manuel.
Conservez ce manuel dans un endroit sûr, relisez-le fréquemment et assurez-vous que tous les utilisateurs le lisent,
an assu
rer une utilisation sécurisée.

Summary

Quick Start Guide - Control Panels (MIG-135 A)

High Temperature Indicator

Indicates the MIG-135A machine's high temperature status.

Amp Regulator

Controls the amperage output of the MIG-135A welder.

Earth Clamp Connection

Wire Guide Dial

Quick Start Guide - Control Panels (MIG-150 R)

MIG Torch

Identifies the MIG torch component on the MIG-150R.

Over Hot Indicator Light

Current Control (Amps)

Power Switch

Turns the MIG-150R welding machine on and off.

Wire Feed Speed Regulator

Adjusts the speed of wire feeding on the MIG-150R.

Earth Clamp

Power Supply

Wire Spool

Wire Feed Pipe

Tension Fastener

Thickness Adjustment Dial

Positive Terminal

Negative Terminal

Quick Start Guide - Welding

Health and Safety Precautions

General Safety Measures

Covers essential safety measures like proper equipment, environment, and operational procedures.

Electrical and Radiation Hazards

Details risks of electric shock, arc radiation, and necessary protective measures.

Troubleshooting

Oxidisation Occurring During Weld

Difficulty Striking;Maintaining Arc

No Power Output

Untidy Welds

Wire Feed Instability

Rohr MIG-150R Specifications

General

Frequency	50/60 Hz
Efficiency	85%
Power Factor	0.73
Insulation Class	F
Welding Process	MIG
Input Voltage	220V
Output Current Range	150A
Duty Cycle	60% at 150A
Protection Class	IP21