Date setting
Under time mode, press SET button to enter date mode.
1. Press and hold SET button for 2 seconds to enter date setting,
press SET button repeatedly to set the date as the following
sequence: Year – month – day - quit
2. Press and hold the UP/DOWN buttons to speed up the forward
or reverse scanning of the digits.
3. Under setting mode, without any button operation in 15 seconds
exit automatically.
Alarm setting
Under clock mode, press SET button twice to enter Alarm 1/Alarm
2/Alarm 3 mode, default in display -- A1/-- A 2/ -- A3.
1. Under alarm mode –A1, press UP button repeatedly to turn on
or turn off the alarm. When activate –A1, the alarm icon “OnA1”
appears on display then enter alarm time display. Press SET
button for 2 seconds to enter alarm setting, press SET button
repeatedly to set the alarm as the following sequence: Hour -
Minute – quit. Press and hold UP/DOWN buttons to speed up the
forward or reverse scanning of the digits.
2. Set the –A2 and –A3 as the setting step of –A1.
3. Under setting mode, without any button operation in 15 seconds
exit automatically.
4. Alarm will sound for 1 minute when set time is out but the alarm
symbol “.” will keep on the display; press any button to stop the
alarm. The alarm is daily activated.
5. Under setting mode, turn off alarm mode. During setting alarm
won’t sound.
6. Under alarm mode, without any operation and not under alarm
activation status, without any operation in 30 seconds the item
enter power saving mode but the time keeps running.
Temperature display
1. After power on, automatically detect the current temperature and
update the temperature every 60 seconds.
2. Press DOWN button for 2 seconds to switch Celsius (ºC) /
Fahrenheit (ºF).
3. Under dP-1 mode, automatically alternate display temperature
for 2 seconds.
To Next Page
Loading...