RP248CN User’s and Installer’s Manual Page 1
CHAPTER 1- SUMMARY of USER’S COMMANDS
The Summary of User’s Commands offers installers and users a quick and convenient way
to operate control panel. All can be done under the state of disarm and so it doesn’t need to
entry programming statue. For detailed information, please go chapter 2 and chapter 3.
No Function Procedure
1 Quick arm [ARM]
2 Arm by code [master code] + [ARM]
3 Arm Stay zones [STAY]
4 Arm Stay zones by code [ master code] + [STAY]
5 System disarm [user code]+[#]
6 Duress disarm [duress code]+[#]
7 Free from siren [user code]+[#]
8 Bypass zone [*]+[1] [1]+[user code] +[#]+[zone number]
9 Un-bypass zone [*]+[1] [2]+[user code] +[#]+[zone number]
10 Utility output [*]+[2][1]
11 Set follow-me phone No. [*]+[2][7]+[ user code] +[#]+ (1-8)+[ phone No.] +[#]
12 Display trouble [*]+[3][1] +[user code] +[#]
13 Display triggered record [*]+[3][2] +[user code] +[#]
14 Display unready zone [*]+[3][3] +[user code] +[#]
15 Display zone state [*]+[3][4] +[user code] +[#]
16 Display memory [*]+[3][5] +[user code] +[#]
17 Test keypad [*]+[4][1] +[user code] +[#]
18 Test Stand-by battery [*]+[4][2] +[user code] +[#]
19 Off door chime [*]+[4][3] +[user code] +[#]
20 On door chime [*]+[4][4] +[user code] +[#]
21 Off partition door chime [*]+[4][5] +[user code] +[#]
22 On partition door chime [*]+[4][6] +[user code] +[#]
23 Off buzzer [*]+[4][7] +[user code] +[#]
24 On buzzer [*]+[4][8] +[user code] +[#]
25 Walk test [*]+[4][0]
26 Set/change users code [*]+[5] +[user code] +[#]
27 Set time [*]+[6]+[1] +[user code] +[#]
28 Set date [*]+[6]+[2] +[user code] +[#]
29 Next Auto arm time [*]+[6]+[3] +[user code] +[#]
30 Next Auto disarm time [*]+[6]+[4] +[user code] +[#]
31 Auto arm [*]+[6]+[5] +[user code] +[#]
32 Auto disarm [*]+[6]+[6]
33 Auto stay arm [*]+[6]+[7]
34 keypad panic alarm [1]+[2] at least 2 seconds
35 keypad fire alarm [4]+[5] at least 2 seconds
36
keypad special
emergency
[7]+[8] at least 2 seconds
37 Escape [ESC]
Trouble List
LCD Display Trouble
MAIN：LOW BATT
Battery Power low
MAIN：AC TROUBLE AC lost
MAIN：BELL LOOP Siren trouble
FALSE CODE P=1 Code error
KITCHEN：FIR
Fire Loop in trouble
KP=03 COMM TRBL
The bus in trouble, such as No.3 keypad is in
trouble
SYSTEM CLCOK Clock not set
PS= 1 LOW BAT
Power Module Battery low. Such as No.1
power Expansion Module is in trouble
PS=1 AC TRBL
Power Module in AC Trouble. Such as No.1
power Expansion Module is in trouble
PS=1 BELL TRBL
Power Module Siren in Trouble. Such as No.1
power Expansion Module is in trouble
PS=1 AUX TRBL
Power Module Stand-by Power is low. Such
as No.1 power Expansion Module is in trouble
PHONE LINE Phone line in trouble
FIRE DOOR：DAY Day time zone in trouble.
To Next Page
