To Next PageTo Next Page
Need help?Do you have a question about the ROJEK MSP 315 and is the answer not in the manual?
Explains DANGER, WARNING, and CAUTION symbols used in the manual.
Requirements and obligations for machine operators.
Specifies environmental conditions for safe machine operation.
How to identify the machine type using the production shield.
Specifications for MSP 315, MSP 415, and SP 410 models.
Specifications for the MP 415 model.
Details possible configurations and options for the machines.
Presents noise emission levels for machine operation.
References standards and directives applied in machine design.
General safety principles and interpretation of safety symbols.
Fundamental safety rules for machine connection and operation.
Guidelines on appropriate attire and personal safety for operators.
Specific safety rules for machine operators to prevent hazards.
Safety precautions to be followed during machine maintenance.
Safety measures for the immediate working environment.
Precautions for safe transport and indoor storage conditions.
Instructions for safely lifting and moving the machine.
Recommended clearance and space around the machine.
Procedures for levelling and securing the machine to the floor.
How to connect the dust extraction system for planing operations.
How to connect the dust extraction system for thicknessing.
Specifics for connecting exhaust on the MP 415 model.
Electrical connection guide for machines up to 3 kW.
Electrical connection guide for machines over 3 kW.
Safety warnings related to machine electrical operation.
How to check and ensure correct cutterblock rotating direction.
Procedure for changing motor rotation direction if needed.
Information on electrical protection features and safety.
Explanation of the main operating and emergency stop buttons.
Operation of the switch for the feeding drive motor.
Covers protective device, fence, table adjustments, and planing techniques.
Details thicknessing setup, feeding, roller pressure, and table extensions.
Illustrates operator positions for different machine operations.
Specifies required personal protective equipment for safe operation.
Instructions for mounting detachable components onto the machine.
Lists prohibited actions and unsafe practices with the machine.
Lists recommended cutterblock knives and their specifications.
Details procedures for replacing and adjusting cutterblock knives.
Explains methods for setting knives using instruments and gauges.
Describes the process for exchanging and setting TERSA cutterblock knives.
Instructions for adjusting V-belts for cutterblock and feeding drives.
Guidelines for regular cleaning and lubrication of machine components.
Troubleshooting common machine issues and their solutions.
Lists standard accessories supplied with the machine.
Details specialized attachments available for purchase.
Information on how to order replacement parts for the machine.
Explains warranty terms, conditions, and claims process.
Guidance on handling and disposing of product packaging.
Recommendations for environmentally friendly machine disposal.
Electrical schematic for 2.2 kW, 1x230V, 50/60Hz, socket, stop-button, brake release.
Electrical schematic for 2.2 kW, 1x230V, 50/60Hz, socket, stop-button, reverse, brake release.
Electrical schematic for 3.0 kW, 3x400/230V, 50/60Hz, socket, stop-button, brake release.
Electrical schematic for 3.0 kW, 3x400/230V, 50/60Hz, socket, stop-button, reverse, brake release.
Electrical schematic for 3.7 kW, 3x400/230V, 50/60Hz, main switch, stop-button, brake release.
Electrical schematic for 3.0/3.7 kW, 3x400/230V, 50/60Hz, two speed feeding motor.
Lists electric motors used in the machines, including technical data.
Details contactors, switches, wires, and connection boxes used.
General| Brand | ROJEK |
|---|---|
| Model | MSP 315 |
| Category | Industrial Equipment |
| Language | English |
