Contents
Introduction
1.0 Machine using
1.1 Worker´s qualification
1.2 Working surroundings
2.0 Machine signification
3.0 Technical data
3.1 Possible machine variants
3.2 Working nois acoustic data
3.3 List of used documents
4.0 Safety instructions
4.1 General
4.2 Basic safety requirements
4.3 Dress and personal safety
4.4 Safety regulations for operator
4.5 Safety regulations for maintenance
4.6 Safety rules for working place
5.0 Transport and storage
5.1 Transport and storage
5.2 Machine uplift
6.0 Machine positioning
6.1 Working room
6.2 Levelling and attachment of the machine
6.3 Instalment of demountable parts
6.3.1 Saw blade guard on the arm R
6.3.2 Saw blade guard on the arm CPS
7.0 Connecting of exhaustion
8.0 Connecting to the mains
8.1 Connecting to the mains
8.2 Safety of machine run
8.3 Saw blade rotating direction
8.4 Rotating direction change
8.5 Protection of electric parts
8.6 Machine control
8.6.1 lower panel machine control (PF 300L; PF 350)
8.6.2 upper pan. machine control (PF 300L;LE; PF 350; E)
8.6.2.1 controllers
8.6.2.2 tilting of saw blades
a) by pushers
b) by reaching a set up value
To Next Page
