7
Forward and reverse of the vehicle is controlled by the control stick, push the stick into the slot D to make the kart move forward; keep the stick in slot N to park; pull back the
stick in slot R to reverse the vehicle.
Warning: Make sure the vehicle is completely stopped before changing shift, or it will damage the parts in gearbox.
(9) The seat back lock lever is underneath the seat, pull up the lever to adjust the seat, when satisfied, release the lever to lock the position.; seat location adjuster is in the inner
side of the seat, pull up to adjust , when satisfied, release the lever to lock
Fig 10
（10）The gearbox is a small advanced structure, its main function is to control the vehicle forward and backward.
Fig 11
The reverse ratio is 2.19; please use SAE10-30 engine oil. Drain all the oil in the gearbox before replace the oil .periodically change oil according to the maintenance table in
periodical maintenance section.
(11) Steering side rod
Front wheel alignment can be accomplished by actual use of steering side rod. (The angle of inner obliquity is 1
o
, normally no need to adjust)
Gearbox
Seat back lock switch
To Next Page
