Confidential & Proprietary|© ROKIT Healthcare Inc. 2019. All Rights Reserved
Dr. INVIVO 4D Overview
CATEGORY STANDARD UPGRADE PREMIUM
Printing Modules
Filament Extruder +
Syringe Bio-Dispenser
Filament Extruder +
Syringe Bio-Dispenser
Filament Extruder + Syringe Bio-
Dispenser
+ Hot-Melt Pneumatic Dispenser
LCD LCD Touch Screen / Android OS
Printing Degree of
Precision
Filament Extruder 0.2mm / Syringe Bio-Dispenser 0.08mm
HEPA Filter H14 HEPA Filter
Disinfecting UV Lamp Disinfecting UV Lamp (12W/254nm)
UV LED UV LED (365nm)
Extruder Removable extruder nozzle / tube system
Syringe Bio-Dispenser Mechanical precision motor syringe (10 ml default; 3 ml optional)
Curing UV Lamp - UV LED (365 nm) UV LED (365 nm)
Syringe Bio-Dispenser
Temperature Control
-
Temperature control function (-
4~60℃)
Temperature control function (-
4~60℃)
Printing Bed
Temperature Control
-
Temperature control function (-
4~60℃)
Temperature control function (-
4~60℃)
Nozzles
Extruder: Ø 0.2~0.4mm
Syringe Bio-Dispenser: Ø 0.1~0.4mm
Extruder: Ø 0.2~0.4mm
Syringe Bio-Dispenser: Ø 0.1~0.4mm
Extruder: Ø 0.2~0.4mm
Syringe Bio-Dispenser: Ø 0.1~0.4mm
Hot-Melting Pneumatic Dispenser
0.1~0.5mm
Hot Melting Pneumatic
Dispenser
- -
Hot-Melting Pneumatic Dispenser
(~350℃)
Build Volume 100 X 100 X 80mm
Printing Speed 3~20mm/sec
※ NOTE : The above specifications may be subject to change without notice to improve performance
10
SPECIFICATION
INV-CHS-20191210
To Next Page
Loading...