Need help?Do you have a question about the Rokit Dr. INVIVO 4D and is the answer not in the manual?
Legal disclaimers and intellectual property rights.
Critical warnings and precautions for safe operation.
Safety rules for using the device and its components.
Overview of the Dr. INVIVO system and its capabilities.
Detailed technical data and parameters of the system.
Lists and diagrams of basic and accessory components.
Guidelines and checks before starting installation.
Step-by-step guide for installing the main unit and accessories.
Setup for the NewCreatork software and Wi-Fi connection.
Essential steps before starting printing operations.
Instructions for using the temperature controller, dispensers, and compressor.
Steps for preparing and executing prints with different dispensers.
Procedures for setting X-Y position and bed leveling.
Options for transferring and printing files via USB, cable, or wireless.
Guidelines for cleaning and handling components after use.
Common questions about OS, software, and USB issues.
Troubleshooting for installation, connectivity, and printhead positioning.
FAQs related to file printing errors and calibration problems.
Questions regarding component maintenance, coolant, and operation.
Information on using the system's camera and related app.
General| Print Speed | Up to 150 mm/s |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Leveling | Manual |
| Weight | 15 kg |
| Technology | FFF (Fused Filament Fabrication) |
| Materials | PLA, ABS, TPU |
| Layer Resolution | 0.05 - 0.3 mm |
| Connectivity | USB, Ethernet |
| Printing Technology | FDM |
To Next Page