Rokit Dr. INVIVO 4D - Page 43

Confidential & Proprietary|© ROKIT Healthcare Inc. 2019. All Rights Reserved
Dr. INVIVO 4D User Guide
Using Bio-Ink Warmers
1. You can store the spare syringes containing printing materials on the left bio-ink warmer inside of the Dr. INVIVO body.
2. Select [New Creator K APP] > [Printer View] on Dr. INVIVO display.
3. Set the desired temperature in [TEMPERATURE].
4. Get ready to pre-heat the syringes at a desired temperature.
43
INV-CHS-20191210