EasyManua.ls Logo

Roksan Audio Caspian M2 - User Manual

Roksan Audio Caspian M2
6 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Caspian M2 Integrated Amplier User Manual
Roksan Audio Ltd
Jubilee Close
Townsend Lane
London NW9 8TR
Tel: +44 (0)20 8900 6801 Fax: +44 (0)20 82052644
Email: info@roksan.co.uk Web: www.roksan.co.uk
INTRODUCTION
M2 Integrated Amplier
Caspian M2 Integrated Amplifier User Manual
Page 1
ROKSAN WARRANTY REGISTRATION
In Case Of Difculty
Call: +44(0)20 8900 6801
VISIT
http://www.roksan.co.uk/rw.php
Congratulations on your purchase of the ROKSAN M2 Integrated Amplifier. This amplifier is designed and
manufactured to the highest specification and rigorously tested to offer you many years of trouble-free
pleasure.
Your M2 Integrated Amplifier is the heart of your hi-fi system. Its correct installation, set-up and operation
will have a profound influence on the sonic performance of the entire hi-fi installation.
Please read the contents of this manual thoroughly. It will help you to understand your hi-fi equipment
better and enhance your listening pleasure.
This manual is divided into the following sections:
• Safety Instructions (Accompanying card)
• Introduction
• Caution
• Installation
• Setup
• Operation
• Troubleshooting
• Guarantee
• Notes
• Specifications
UNPACKING
Included in the packing of your M2 Integrated Amplifier you will find:
• One mains lead fitted with the correct mains power plug for your country
• One Roksan learning system remote handset (RMX-111) and USB lead
• One RMX111 - Remote User Manual
After removing these items please retain all packing materials. Correct packing is necessary for
transportation of your M2 Integrated Amplifier.
MAINTENANCE
After disconnecting the amplifier from the mains supply, the cabinet and front panel may be cleaned with a
lightly dampened soft cloth or chamois leather. Avoid using abrasives or solvents.
EU DIRECTIVES
This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and 72/23/EC.
The standards which have been applied are those which were in force at the time of the introduction of
this product.
This product bears the CE mark.
This product is compliant to EN 60065.
This product must be earthed. Please ensure that other equipment connected to it is earthed according
to the manufacturer’s instructions.

Table of Contents

Questions and Answers

  • D
    Dr. Brian Barrett Jr.Jul 31, 2025
    How to troubleshoot a Roksan Audio Amplifier with no power?
    • T
      Tammy BarronJul 31, 2025
      If your Roksan Audio Amplifier has no power, first ensure the AC Mains lead is fully inserted. Also, verify that the unit is switched on at the front left underside.
  • P
    paula08Aug 4, 2025
    What to do if my Roksan Audio Amplifier has no output on one or both channels?
    • M
      Maria HuntAug 4, 2025
      If you're experiencing no output on one or both channels of your Roksan Audio Amplifier, consider the following: * If the amplifier is in stand-by mode (MODE light GREEN), press the MODE button on the front panel to set the amplifier in operational mode (MODE light RED). * Check all input connections to ensure they are properly connected. * Verify the speaker output connections on the rear panel are correctly set. * Ensure the correct input is selected and the source is working. * Deselect Tape Monitor if it's currently selected. * If the amplifier is overheating, allow it to cool, increase ventilation, or use it at a lower volume.
  • N
    nicole28Aug 10, 2025
    Why is there hum coming from the speakers of my Roksan Audio Amplifier?
    • M
      Mary PattersonAug 10, 2025
      If you hear hum coming from the speakers connected to your Roksan Audio Amplifier, the issue might be incorrect grounding. Check the mains polarity and grounding on all connected equipment.
  • E
    elizabethhoustonAug 15, 2025
    What to do if my Roksan Audio Amplifier has very low sound output?
    • B
      Brian Moore DVMAug 15, 2025
      If your Roksan Audio Amplifier has very low sound output, make sure that MUTE is not selected. Before that, check the volume setting.
  • J
    Jessica WoodAug 19, 2025
    Why does my Roksan Audio Amplifier have poor speaker imaging and lack of bass output?
    • R
      Rhonda GarciaAug 19, 2025
      If your Roksan Audio Amplifier has poor speaker imaging and lacks bass output, check the polarity of the speaker connections. This is especially important if you're using multi-wiring or multi-amping.
  • K
    keithortizAug 25, 2025
    How do I fix a Roksan Audio Amplifier CD input with no sound?
    • J
      joshuaflemingAug 26, 2025
      If the CD input on your Roksan Audio Amplifier has no sound, the CD RCA/XLR switch may be in the wrong position. Switch it to RCA or XLR as needed.

Summary

Introduction

Unpacking

Maintenance

EU Directives

Caution

AC Mains Supply

Details on selecting the correct voltage and connecting the mains lead, emphasizing safety.

FCC Warning

Warning regarding potential radio frequency energy generation and user operation rights.

Interference

Guidance on potential radio communication interference and troubleshooting steps.

Location

Recommendations for optimal placement, emphasizing ventilation and avoiding heat and dust.

Installation

Setup

Connecting Mains Power

Instructions for connecting the IEC mains lead and operation of the power switch.

Signal Connections

Details on connecting various audio sources using RCA and XLR connectors.

Loudspeaker Connections

Guidance on connecting speakers using binding posts, including polarity and cable preparation.

Multi-Wiring and Multi-Amping

Switching On

Using the Controls

Mode Control

Explanation of the MODE button functions: activation, muting, and warm-up/standby.

Troubleshooting

Remote Control

Specification

Guarantee

Roksan Audio Caspian M2 Specifications

General IconGeneral
BrandRoksan Audio
ModelCaspian M2
CategoryCD Player
LanguageEnglish

Related product manuals