Roland Alfa JUNO-2 - Page 10

•
How to
record Chord
Data used for
Chord
Memory
Function
When
a
chord
data is recorded into
the a
JUNO
with
the Memory
Protect Switch set to
the ON
position,
it is erased by
power off. If you
wish to
retain
the
recorded
chord data even
after power
off, you should
record it with the
Memory Protect
Switch
®
set
to
the OFF
position.
<OPERATION>
©
Set
the Memory
Protect Switch as
shown
below.
@
Play
the chord you
wish to
record.
When all the
keys are
released, the
chord data
is
recorded,
and the Display
®
will
respond
with
:
Memory Protect Switch ®:
ON
—
»
Erased
when the power
is off.
When the Memory Protect
Switch
is set
to ON.
Memory
Protect Switch
®
:
OFF
-
f?etained even
after the power is off.
When the
Memory Protect
Switch is set
to OFF.
(2)
Press the Write Button
®
while
holding
the Chord Memory Button
O
down.
®
If necessary,
return the Memory Protect
Switch to the
ON position.
The
Display
®
will respond
with
:
*
While a chord data
is being recorded, the
Octave
Transpose
or Key Transpose
function
does
not
work,
therefore, the middle C key
always works
as
C4 key.
*
When the recorded
chord is being played, the
Octave Transpose and
Key Transpose
functions
work. When Octave Transpose is normal and
the Key Transpose is
0,
playing the 04 key
will
faithfully recall the
recorded
chord.
*
By
recording the C4 key, the a JUNO can be
played
as
a
monophonic keyboard.
*
If
the
keyboard is being
played extremely fast
or
too many
NOTE ON messages are continu-
ously sent into the MIDI IN, the
chords
may
not
properly
sound.
10