Why is my Roland Synthesizer A-PRO not recognized after driver installation?
If your computer isn't recognizing your Roland Synthesizer (A-PRO) correctly, it may be because the driver wasn't installed properly. Remove the driver and reinstall it following the instructions in 'Installing the Driver'.
Why can't I install the Roland cakewalk A-300PRO Synthesizer driver due to 'Driver Signing Options'?
If you're unable to install the driver for your Roland Synthesizer, it might be due to your 'Driver Signing Options' settings. In the 'Driver Signing Options' dialog box, select either [Warn] or [Ignore], and then click [OK].
What to do if Roland cakewalk A-300PRO Synthesizer has interrupted notes or dropouts in the sound?
If you are experiencing interrupted notes or dropouts in the sound with your Roland Synthesizer, consider adjusting your computer's power management settings. This might resolve the issue.
How to fix if Roland cakewalk A-300PRO A-PRO is in use by other software?
If your Roland Synthesizer (A-PRO) is not working correctly, it might be in use by other software. To fix this, close all running software, switch off the A-PRO, and then turn it back on. If the problem persists, reinstall the driver.
What to do if Roland cakewalk A-300PRO Synthesizer A-PRO is not working after computer sleep mode?
If your Roland Synthesizer (A-PRO) isn't functioning, the computer it's connected to may have entered standby, hibernate, or sleep mode. Close all software using the A-PRO, switch off the A-PRO, and then turn it back on. If the issue continues, restart your computer.
What to do if I disconnected and reconnected the USB cable while using Roland cakewalk A-300PRO A-PRO?
If you're having trouble with your Roland Synthesizer (A-PRO), it could be due to disconnecting and reconnecting the USB cable while using it. To resolve this, close all software using the A-PRO, turn off the A-PRO, and then turn it back on. If the problem continues, try restarting your computer.
Why doesn't the bender lever apply pitch bend or modulation on my Roland Synthesizer?
If the bender lever on your Roland Synthesizer isn't applying pitch bend or modulation, it may have assignments made. Set the bender and modulation to NO ASSIGN as described in 'Clearing an Assignment'.
General| Number of Keys | 32 |
|---|---|
| Aftertouch | Yes |
| Transport Controls | Yes |
| MIDI I/O | In/Out |
| Key Type | Synth-action |
| Control Elements | Pitch Bend/Modulation Lever |
| Pads | 8 |
| Knobs | 9 |
| Sliders | 9 |
| Connectivity | USB |
| Pedal Inputs | 2 |
| Software Included | Cakewalk SONAR LE |
| Power | USB Bus Powered or AC Adapter |
To Next Page