Roland JV-1010 User Manual

Thank you, and congratulations on your choice of the Roland JV-1010 64 Voice Synthesizer
Module.
In order to get a good understanding of the JV-1010’s many outstanding features and ensure
many years of trouble-free use, please be sure to read through this manual in its entirety.
* Apple is a registered trademark of Apple Computer, Inc.
*Macintosh is a registered trademark of Apple Computer, Inc.
*Emagic and SoundDiver are registered trademarks of Emagic GmbH.
Copyright © 1999 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled: “USING THE UNIT
SAFELY” (p. 2–4) and “IMPORTANT NOTES” (p. 5, 6). These sections provide
important information concerning the proper operation of the unit. Additionally,
in order to feel assured that you have gained a good grasp of every feature
provided by your new unit, Owner’s manual should be read in its entirety. The
manual should be saved and kept on hand as a convenient reference.
OWNER’S MANUAL

Roland JV-1010 Specifications

General

Type	Synthesizer Module
Polyphony	28 voices
Multitimbral	16 parts
MIDI	In, Out, Thru
Effects	Reverb, Chorus, Delay
Expansion Slot	1 SR-JV80 series expansion board
Synthesis Type	PCM
Outputs	Stereo (L/Mono, R)
Sound Engine	JV-1080 Sound Engine
Presets	512
Headphones	1/4 inch stereo jack
Power Supply	DC 9V
Patches	640 patches (user: 128, preset: 512)

Summary

USING THE UNIT SAFELY

General Safety Precautions

Essential guidelines for safe operation, including placement and modification avoidance.

Important Notes

Power Supply

Guidance on using the unit's AC adaptor and connecting to other devices safely.

Placement

Repairs and Data

Memory Backup

Main Features Overview

JV-1080 Sound Module Capabilities

Highlights the 16-part multitimbral sound generator and multi-effects processor.

General MIDI System Compliance

Front and Rear Panel Controls

Front Panel Controls and Jacks

Detailed description of the JV-1010's front panel controls and jacks.

Quick Start Guide

Making the Connections

Diagrams and instructions for connecting audio and MIDI devices to the JV-1010.

Powering On and Off Safely

Procedures for safely switching the JV-1010 and connected equipment on and off.

Factory Reset Procedure

Choosing and Playing Patches

Patch Group Overview

Using JV-1010 as GM Sound Module

Entering GM Mode

Changing Sounds via External MIDI

Note on MIDI Sound Switching

Changing Patches via MIDI

Performance Mode Explained

Editing JV-1010 Parameters

Making Part Settings

Guide to adjusting individual part parameters like Level, Pan, and Tuning within Performance mode.

Memory Operations (UTILITY)

Restoring Factory Settings

Procedure to reset all unit settings to their factory default state.

System Settings Management

Selecting Perform Ctrl Channel

Appendices Section

Troubleshooting Guide

Common issues and solutions for problems with the JV-1010's operation.

JV-1010 Specifications

Computer Cable Wiring Diagrams