Roland JV-1010 User Manual

4
USING THE UNIT SAFELY
101b
• The unit and the AC adaptor should be located so
their location or position does not interfere with
their proper ventilation.
..........................................................................................................
102d
• Always grasp only the plug or the body of the AC
adaptor when plugging into, or unplugging from,
an outlet or this unit.
..........................................................................................................
103b
• Whenever the unit is to remain unused for an
extended period of time, disconnect the AC
adaptor.
..........................................................................................................
104
• Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
107d
• Never handle the AC adaptor body, or its plugs,
with wet hands when plugging into, or
unplugging from, an outlet or this unit.
..........................................................................................................
108b
• Before moving the unit, disconnect the AC adaptor
and all cords coming from external devices.
..........................................................................................................
109b
• Before cleaning the unit, turn off the power and
unplug the AC adaptor from the outlet.
..........................................................................................................
110b
• Whenever you suspect the possibility of lightning
in your area, disconnect the AC adaptor from the
outlet.
..........................................................................................................
115a
• Install only the specified circuit board(s) (SR-JV80
series). Remove only the specified screws (p. 16).
..........................................................................................................

Roland JV-1010 Specifications

General

Type	Synthesizer Module
Polyphony	28 voices
Multitimbral	16 parts
MIDI	In, Out, Thru
Effects	Reverb, Chorus, Delay
Expansion Slot	1 SR-JV80 series expansion board
Synthesis Type	PCM
Outputs	Stereo (L/Mono, R)
Sound Engine	JV-1080 Sound Engine
Presets	512
Headphones	1/4 inch stereo jack
Power Supply	DC 9V
Patches	640 patches (user: 128, preset: 512)