45
Performing (Play Mode)
The DUAL button lets you simultaneously play both the LOWER and UPPER sounds
from the entire keyboard.
fig.Dual-e.eps
1 Press the [DUAL] button so it’s lit.
* If the cursor is at “PGM CHANGE” in the display, turning the [VALUE] knob will
change the UPPER sound.
* To change the LOWER sound, set ACTIVE PART (p. 62) to LOWER. Then move the
cursor to “PGM CHANGE” and turn the [VALUE] knob.
* The assignment of the [DUAL] button can be changed in A-PRO Editor’s keyboard
set window (p. 26).
The SPLIT button lets you play the UPPER sound in the range of C4 and above, while
playing the LOWER sound in the range of B3 and below.
fig.Split.eps
1 Press the [SPLIT] button so it’s lit.
* If the cursor is at “PGM CHANGE” in the display, turning the [VALUE] knob will
change the UPPER sound.
* To change the LOWER sound, set Active Part (p. 62) to LOWER. Then move the
cursor to “PGM CHANGE” and turn the [VALUE] knob.
* The assignment of the [SPLIT] button can be changed in A-PRO Editor’s keyboard
set window (p. 26).
Layering Two Sounds (DUAL)
UPPER
LOWER
Playing Two Sounds Separately (SPLIT)
UPPER
C4B3
LOWER
A-300_500_800C_e.book 45 ページ ２０１０年２月２２日 月曜日 午後９時１３分
To Next Page
Loading...
