Roland CB-CS1 - User Manual

1. Open the carrying case and place the
CUBE STREET inside.
2. Tighten the strap on the top of the
carrying case to secure the case and
the unit in place.
When transporting the unit, close the
fasteners on either side. When moving the
unit, hold it by the handle on the CUBE
STREET itself. (Never grasp the unit by the
strap on the case.)
3. When using during a performance,
fold back the cover and secure it
in place with the hook-and-loop
fastener.
When positioning the unit, arrange it so
that the feet will not get entangled in the
shoulder belt.
How to Store
Copyright © 2014 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
ROLAND CORPORATION.
USING THE UNIT SAFELY
WARNING
Do not drop or subject to strong impact
Otherwise, you risk causing damage or
malfunction.
IMPORTANT NOTES
• This product is a carrying case for CUBE STREET.
• Do not expose the unit to direct sunlight, place
it near devices that radiate heat, leave it inside
an enclosed vehicle, or otherwise subject it to
temperature extremes. Excessive heat can deform or
discolor the unit.
• For everyday cleaning wipe the unit with a soft,
dry cloth or one that has been slightly dampened
with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly with
a soft, dry cloth.
• Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
• Do not launder or wash the entire bag.
Main Speci cations
Dimensions
440 (W) x 220 (D) x 280 (H) mm
17-3/8 (W) x 8-11/16 (D) x 11-1/16 (H) inches
(not including the belt)
Weight 800 g / 1 lb 13 oz
Main Materials Polyvinyl chloride
* In the interest of product improvement, the speci cations
and/or appearance of this unit are subject to change without
prior notice.
CB-CS1 MADE IN CHINA
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
WARNING
This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.
For C.A. US
(
Proposition 65
)
* 5 1 0 0 0 3 9 2 3 8 - 0 3 *

Summary

Instructions for Prevention of Fire, Electric Shock, or Injury

About WARNING and CAUTION Notices

Explanation of warning and caution notice symbols and their meanings.

About the Symbols

Detailed explanation of various warning and prohibition symbols used.

Always Observe the Following

General safety guidelines that users must always adhere to.

Important Notes

Product Usage and Care

Key considerations for using the carrying case and product care, including temperature and cleaning advice.

Main Specifications

Dimensions Specification

Specifications for the unit's width, depth, and height.

Weight Specification

Specification of the unit's weight.

Main Materials Specification

Information on the primary materials used in the unit's construction.

How to Store

Storing the CUBE STREET in the Case

Instructions for opening the case and placing the CUBE STREET unit within, securing it with straps.

Cover Usage During Performance

Folding back the cover for performance use and securing with fastener.

Positioning for Use

Positioning the unit to prevent entanglement of feet with the shoulder belt.

Transporting the Unit

Closing fasteners for transport and proper carrying method by the main unit handle.

Roland CB-CS1 Specifications

General

Material	Nylon
Padding	Yes
Carrying Options	Shoulder strap
Color	Black
Compatibility	Roland Cube Street, Cube Street EX