Roland CUBE-40GX - Demonstrate LEAD Channel; Demonstrate SOLO Channel

Roland CUBE-40GX Training Guide
2. Select a LEAD amp tone such as BRIT COMBO, CLASSIC STACK or
EXTREME, depending on the kind of music the customer wants to play.
3. Set the GAIN knob to about 5 to start out. Turn it clockwise for more
distortion and gain.
4. Play (or have the customer play) some chords and leads appropriate for a
lead guitar sound,
5. Experiment with the EQUALIZER, EFX, DELAY and REVERB to check
out their sounds.
STEP THREE: Show the SOLO Channel
SOLO is a memory channel. It can store and recall the settings of the other
knobs.
1. Press the SOLO channel button.
2. Play some chords or lead appropriate to the SOLO sound.