Roland EP-7 - MIDI Connections

TUNE TEA E PU UC IN ES
QUT IN WP A MONG) 170004
© Beer
This connector is where MIDI messages are
received. If you wish to have the ep-7 be played
as a result of messages sent by a MIDI se-
quencer or other external unit, connect a cable
so it runs from here to the MIDI OUT connector
on the external device.
From this connector MID! messages are trans-
mitted. If you wish to use the ep-7 to play the
sounds of another MIDI compatible unit, such
as a sound module; or want to send the infor-
mation describing what you play to a sequencer
for recording, connect a cable so it runs from
here to the MIDI IN connector on the external
device.
In order to make the connections between the
connectors on two units, you will need to have at
least one MIDI Cable. (MSC-15/25/50, sold sepa-
rately.)
* Connecting a sound module, such as the MT-32 * Connecting a sequencer
ep.
sequencer
MIDI
re QUTIN
00
* Connecting the MT-100