Roland FANTOM-07

Sequencer
31
Creating a Group
1.
Press the [PATTERN] button.
The PATTERN screen appears.
2.
Here’s how to select patterns for each track to specify
their combination.
3.
Touch <GROUPING>.
The GROUP LIST appears.
4.
Move the cursor to the number that you want to specify.
5.
Touch <SET>.
A conrmation message appears.
To cancel, touch <CANCEL>.
6.
To execute, touch <OK>.
The current combination of patterns for each track is
registered as a group.
7.
As necessary, repeat steps 2–6 to create groups.
You can touch <RENAME> and assign a name to the group
that you create.
Creating a Song
1.
Press the [GROUP] button.
The GROUP screen appears.
2.
Touch <MAKE SONG>.
The MAKE SONG screen appears.
3.
In the GROUP LIST located at the left side of the screen,
touch <ADD> for the group that you want to play back
rst.
The group you touch is added to the SONG eld at the right,
and the input position advances by one.
MEMO
¹
If you touch <ADD/REPLACE> and use REPLACE to input, the
group at the input position is replaced.
¹
A maximum of 32 groups can be input.
¹
If you touch <BACK DEL>, the group at the input position is
deleted, and the input position returns by one.
4.
Repeat step 3 as necessary to create your song.
NOTE
If after creating a group or song, you switch to another scene or
turn o the power without saving the scene, the data you created is
lost.