Roland Fantom-G Series User Manual

14
If you change the control source assigned to the System Control, you
therefore automatically change the control source of any sound set to use
it.
All of the factory patches are set by default to use System Controls 1-4 as
their four control sources. As a result, it’s easy to change a control source
for all of these patches at once by simply changing a System Control to
whatever it is you want to use.
As you program your own patches, you can use something other than
the default assignment as a System Control’s control source if you prefer.
Changing your mind about what you want to use in all of your patches at any
time is a trivial matter, thanks to the helpful System Controls.
Here’s how to assign a System Control Source:
Press the MENU button.
1
Click F2 (System).2
Use F2 (Group/Down) to select the System Ctrl parameter group.3
Set the desired System Control’s System Control Source parameter to 4
the desired value.
The End
We hope you’ve found this workshop helpful. Keep an eye out for other
Fantom-G Workshop booklets available for downloading at www.RolandUS.
com.

Roland Fantom-G Series Specifications

General

Polyphony	128 voices
Arpeggiator	Yes
Expansion Slots	2 ARX expansion slots
Keyboard	88 keys (Fantom-G8), 76 keys (Fantom-G7), 61 keys (Fantom-G6)
Preset Patches	Over 1, 500
Effects	Multi-effects, reverb, chorus, mastering effects
Sequencer	16-track MIDI sequencer
Display	8.5-inch color LCD
USB	USB (MIDI/Audio/Storage)
Sampling	Yes
Controllers	Pitch bend/modulation lever
Audio Inputs	2 x 1/4" (L/Mono, R)
Audio Outputs	4 x 1/4" (L/Mono, R, Assignable 1, Assignable 2), 1 x 1/4" (Headphones)
MIDI	In, Out, Thru
Storage	USB Flash Memory
Connectivity	USB, MIDI, Audio In/Out