Roland HP 1500 - Program Change Messages; Transmitting Program Change Messages; Receiving Program Change Messages

Transmission/Reception of Program Change Messages
Transmitting
While holding down the FUNCTION button, press the keys corresponding to the Group, Bank, and Number which
make up the Program Change message vou wish lo transmit.
ers
Group A Group B
Nunthes T
e
While
holding
Numer
,
"
Number
BANK TH
Bank
Bank
100
elli
NUMBER IH 5 GROUP AR
Press the kev that comesponds
to the program change number
vou want
bE 27 E28
* In the Mode 3 Transmission/Reception mode, the appropriate Program Change message will be transmitted when-
ever you press a Voice button.
1 PIANO 13 PIANO + VIBRAPHONE 32 HARPSICHORD + STRINGS
3 HARPSICHORD 14 PIANO + E.PIANO 46 VIBRAPHONE + E.PIANO
5 VIBRAPHONE 15 PIANO + PIPEORGAN 47 VIBRAPHONE + PIPEORGAN
6 E.PIANO 16 PIANO + STRINGS 48 VIBRAPHONE + STRINGS
7 PIPEORGAN 29 HARPSICHORD + VIBRAPHONE 55 E,PIANO + PIPEORGAN
8 STRINGS 30 HARPSICHORD + E.PIANO 56 F.PIANO + STRINGS
11 PIANO + HARPSICHORD 31 HARPSICHORD + PIPEORGAN 64 PIPEORGAN + STRINGS
Receiving
When a Program Change message is received, a change is made to the correspondingly numbered Voice, as shown
below.
1 PIANO 13 PIANO + VIBRAPHONE 32 HARPSICHORD - STRINGS
3 HARPSICHORD 14 PIANO 4 E.PIANO 46 VIBRAPHONE + E.PIANO
5 VIBRAPHONE 15 PIANO + PIPEORGAN 47 VIBRAPHONE + PIPEORGAN
6 E.PIANO 16 PIANO + STRINGS 48 VIBRAPHONE + STRINGS
7 PIPEORGAN 29 HARPSICHORD + VIBRAPHONE 55 E.PIANO + PIPEORGAN
8 STRINGS 30 HARPSICHORD + E.PIANO 56 E.PIANO + STRINGS
11 PIANO + HARPSICHORD 31 HARPSICHORD + PIPEORGAN 64 PIPEORGAN + STRINGS
* Program Changes except those mentioned above will be ignored.