6
MANUAL + [9] [1], [2]
Sets Chain Mode on or off. Chain Mode can be used to increase polyphony by connecting more units via
MIDI cable.
[1] OFF. Prevents communication with additional units.
[2] ON. Allows additional polyphony with more units attached via MIDI cable. In this mode, the 5
th
and subsequent notes are passed through to additional units via MIDI out.
MANUAL + [10] [1] thru [16]
Sets the ribbon controller note scale. The default is [1].
MANUAL + [11] [1], [2]
Sets the modulation hold of the C2 ribbon controler.
[1] HOLD OFF (default)
This is like having a spring on the mod-wheel – the second you take your finger off it, the modulation effect
jumps back down to zero.
[2] HOLD ON
This forces the mod wheel to remain at the point you take your finger off it, which is like a standard mod-
wheel without a spring.
MANUAL + [13] [1] thru [13], [16]
Specifies the Pitch Bend range in semitones.
[1] thru [12] 1 thru 12 semitones, with a default of [2]
[13] 2 Octaves
[16] OFF
MANUAL + [14] [1] thru [16]
Adjusts the delay level applied to the patch. [1] is no delay, and [2] thru [16] adjust it incrementally for a more
pronounced effect.
MANUAL + [15] [1] thru [16]
Adjusts the delay time applied to the patch in incremental adjustments of [1] thru [16]. Note that this delay time
refers to the length of time before the delay takes effect, not how long the delay effect is.
MANUAL + [16] [1] thru [16]
Adjusts the delay feedback applied to the patch. [1] is no feedback, and [2] thru [16] adjust it incrementally for a
longer delay.
The step sequencer lets you input notes in up to 16 steps, and then play the notes back in a repeating loop. The
number of steps can be adjusted from 1 to 16, and a maximum of 16 individual patterns can be stored.
Press both the DUAL and MANUAL buttons (SEQ) simultaneously to enter or exit step sequencer mode.
Step Buttons [1] thru [16]
In Step Sequencer mode, the PATCH
NUMBER and PATCH PRESET buttons
represent the 16 steps of the sequencer. While in this mode, the following button press options are available:
To Next Page
Loading...
