Do you have a question about the Roland JUNO-X and is the answer not in the manual?
keyboard keys | 61 keys |
---|---|
preset tone | 4000 or greater |
user tone | 256 |
multi-effects systems | 4 systems |
---|---|
multi-effects types | 93 types |
reverb types | 8 types |
bluetooth profile support | A2DP (Audio), GATT (MIDI over Bluetooth Low Energy) |
---|---|
codec | SBC (Support to the content protection of the SCMS-T method) |
display resolution | 128 x 64 dots |
speaker amplifier power | 4W x 2 |
---|---|
full range speakers | 3.5 x 8 cm x 2 |
tweeter size | 2 cm x 2 |
headphones jack | Stereo miniature phone type (front), Stereo 1/4-inch phone type (rear) |
---|---|
main out jacks | 1/4-inch phone type, XLR type |
mic input jack | 1/4 inch phone type/XLR type |
dimensions | 1072 (W) x 333 (D) x 118 (H) mm |
---|---|
weight | 11.6 kg |
power consumption | 20 W |
Covers JUNO-X update, RCM installation, and downloading the JD-800 Expansion.
Instructions for importing the JD-800 Model Expansion using Roland Cloud Connect.
Steps for saving to USB and installing the JD-800 Model Expansion on the JUNO-X.
How to uninstall expansions and interpret installation error messages.
Instructions for initializing and managing user licenses for Model Expansions.
Detailed explanations of common error messages during installation.
Steps to select a JD-800 tone directly from the JUNO-X.
How to register JD-800 tones to a model bank and select them.
Lists JUNO-X controls and their corresponding JD-800 parameters.
Detailed breakdown of parameters for Portamento, LFO, OSC, Filter, AMP, Env.
Explanation of common tone parameters like EQ, Level, and Key Range.
Detailed description of JD-800 TONE parameters for partials and LFOs.
Details LFO2 settings and general waveform parameters (gain, pitch).
Explains TVF filter modes, frequency, resonance, and envelope controls.
Explains TVF envelope sensitivity, time, and level parameters.
Details TVA parameters and envelope settings for volume control.
Explains effect sequence, delay switch, time, and feedback settings.
Details chorus depth, rate, feedback, and reverb types, time, and level.
Table listing MIDI CC numbers for various JD-800 parameters.
Instructions on how to activate and use the Palette function for editing.
Lists JD-800 preset tones with category and MIDI information.
Continues the list of JD-800 preset tones with their associated data.
Lists waveforms by number, name, category, and MIDI data.
Continues the list of waveforms with their associated category and MIDI data.
Maps JD-800 COM and PTL parameters to MIDI addresses and values.
Details MIDI addresses for common, EQ, LFO, and Pitch parameters.
Maps Filter, Envelope, and TVA parameters to MIDI addresses and values.
Details MIDI addresses for Delay, Chorus, and Reverb effect parameters.